斐卓Feizhuo氣動式伸縮噴槍性能特點

1、  霧化均勻——噴霧全區域的粒徑分布均勻，為液體的均勻蒸發和吸收反應提供了非常優越的保證。平均顆粒直徑只有60μm，粒徑120μm。

2、  運行成本更低——低氣水比是此款噴槍的優點，長時間使用更能節省運行成本。

3、  氣動伸縮裝置——噴槍采用氣動伸縮裝置，噴槍不運行時可以自動退出爐內，易于噴槍的維護，大大延長了噴槍的使用壽命。

4、  流量范圍廣——流量范圍從3L/h—400L/h,可以滿足各種流量需求。

5、  使用壽命長——因噴嘴是在低壓環境下工作，水壓氣壓都不超過0.6Mpa，所以對噴嘴磨損很小，而噴槍亦可帶保護套管，噴嘴置于保護套管內，能夠更好保護噴嘴，從而大大延長使用壽命。

       角度：20°

      流量：0.05-6.67L/min

      材質：304、310不銹鋼，哈氏合金

      噴霧形狀：空心錐形、實心錐形、扇形產品介紹

1, uniform atomization, spray the whole area of uniform particle size distribution, provides the uniform liquid evaporation and absorption reaction is very superior.The average particle diameter of only 60 mu m, maximum particle size of 120 microns.

2, lower operation cost, low gas water ratio is the advantage of this spray gun, use for a long time can save running cost more.

3, pneumatic telescopic device, pneumatic telescopic device for the gun, spray gun not runtime can automatically come back inside, easy to spray gun maintenance, greatly extend the service life of the gun.

4, wide flow range - flow range from 3 l/h, 400 l/h, can satisfy all kinds of traffic demand.

5, long service life, because of the nozzle is working under low pressure environment, hydrostatic pressure no more than 0.6 Mpa, so wear of nozzle is small, and the spray gun can protect casing, nozzle inserted in case, can better protect the nozzle, thus greatly extend the service life.

上海斐卓噴霧系統有限公司脫硝噴槍適用范圍

適用范圍： SNCR或SCR脫硝霧化系統

噴射溶液： 氨水、尿素溶液或液氨

用特種鋼材——具有耐高溫（耐熱溫度1250℃）、耐磨損、耐酸堿等特性，經特殊金屬處理工藝加工而成，確保噴槍品質。

自動伸縮設計——噴槍配有自動伸縮機構，系統停用時噴槍會根據設置要求自動縮回，避免高溫煙氣對噴槍的灼燒，可現場、遠程控制，運行穩定可靠。

降溫設計獨特——為避免噴槍長期在850℃～1050℃的高溫環境下工作，固定式噴槍設計了獨特的降溫保護功能，大大延長了噴槍的使用壽命。

霧化效果良好——霧化角度30°～90°，霧滴顆粒在30～70μm，霧場噴射距離從800mm～7500mm，霧場在煙氣中穿透能力強、與煙氣混合均勻，反應劑與煙氣中的氮氧化物反應更加充分，確保脫硝。

多種型號選擇——噴槍根據型號分為SE、FE、FT、FM、FV五個系列，根據霧場角度分為30°、55°、75°、90°和120°五種型號。單只噴槍噴射量在2～650 L/h，可根據現場工況變化任意調節，能夠滿足各種脫硝工況環境需求。

Shanghai Feii zhuo denitration gun scope of spray system co., LTD

Scope of application: SNCR and SCR denitration atomization system

The injection solution: ammonia, urea solution or liquid ammonia

With special steel, high temperature (1250 ℃) heat temperature resistance, wear resistance, acid and alkali resistance and other properties, processed by special metal processing technology, ensure the quality of spray gun.

Automatic telescopic - gun equipped with an automatic telescopic mechanism design, the system outage spray gun will retract automatically according to set requirements, avoid high temperature flue gas burning of spray gun, on-site, remote control, stable and reliable running.

Cool and unique design, in order to avoid spray gun for a long time at 850 ℃ ~ 1050 ℃ high temperature conditions, fixed gun design a unique cooling protection function, greatly extend the service life of the gun.

Atomization effect is good, atomizing Angle of 30 ° ~ 90 °, droplets particles in 30 ~ 70 microns, the fog spray distance from 800 mm to 7500 mm, fog field in the flue gas penetration ability, and flue gas mixing, reaction agent react with nitrogen oxide in flue gas to more fully, to ensure efficient denitration.

A variety of models to choose - gun according to the model is divided into SE, FE, FT, FM, FV five series, according to the fog field Angle is divided into 55 °, 30 °, 75 °, 90 ° and 120 ° five models.Single gun injection quantity in 2 ~ 650 L/h, can be adjusted according to site condition change, to meet the demand of working condition of all kinds of denitration environment.

Disable prevent function - gun held in design to disable function, t