|
公司基本資料信息
|
||||||||||||||||||||||||||||
武漢科億華科技有限公司開發的可食用的藥用印字油墨，已獲得國家知識產權局批準頒發的發明專利證書。該產品為藥品包裝提供了更安全，更健康的印刷方式。在藥品防偽，外觀美化及宣傳公司品牌上具有重要作用。廣泛應用于膠囊劑、片劑及糖果等藥品、食品的印刷領域，是一種對人體無危害，對環境無污染，適用于凹版印刷的溶劑性油墨，良好的印字效果受到了廣大制藥廠商的好評！
一、 應用特性
1、 主要應用領域： 藥品，食品表面印字，如膠囊，藥片，巧克力，餅干等表面印字和圖案。
2、 環保：使用酒精做為稀釋劑，便宜又環保。
3、 安全：所以成分均采用藥用級輔料，完全符合藥品包裝使用要求。
4、 較強的機械適應性：油墨印刷轉移性能及穩定性能良好，刮刀適應性優良，油墨細度好，不傷版材及刮刀。
5、 良好的印字效果，具有高度的附著力，固色性能良好，字跡清晰，無滲色現象，無毛邊，涂膜光滑，色彩鮮艷。
二、 主要成分
本品為乙醇、二氧化鈦（或氧化鐵或檸檬黃色淀或亮藍色淀）等其他藥用輔料，組成的可流動性混合物，固體總含量為49.0～60.0%。
三、 技術指標
項目 | 指標 |
性狀 | 為流動性粘稠液體，色澤均勻一致，無結塊、無霉變，無肉眼可見外來雜質。 |
滋味、氣味 | 有乙醇味，應具有本產品固有的滋味與氣味，無異味、異嗅。 |
鑒別 | 水份、乙醇蒸發后，形成一層有韌性的薄膜 |
酸堿度 | PH值為7-9 |
顏色 | 近似標樣 |
粒度（μm） | ≤40 |
黏度（pa.s） | 20~80 |
初干性（MM/30秒） | 20～50 |
光澤（反射光澤儀25°）≥ | 40 |
重金屬(mg/kg） | ≤0.5 |
砷鹽 （mg/kg） | ≤0.3 |
微生物限度 | 細菌數(≤1000cfu/g) |
霉菌和酵母菌數(≤100cfu) | |
大腸埃希菌(無) | |
沙門氏菌（無） | |
固體含量測定 | 49.0～60.0% |
裝量 | 不少于標識量 |
類別 | 藥用輔料 |
貯藏 | 遮光，密閉，在陰涼干燥處保存 |
四、 產品分類
按產品顏色分為白、黃、藍、紅、黑五種，也可根據客戶的要求提供專業的配色服務。
五、 包裝規格
每瓶凈重1公斤，每箱20瓶。
六、 注意事項
1、 使用前請將油墨搖勻。
2、 本產品保質期為一年。
3、 貯存應在5~35℃干燥、通風良好、無鼠、無蠅的倉庫內，不得露天存放，不得與化學物質及有害物質共貯，防止受潮、遠離熱源。
4、 剩余的油墨要用塑料桶裝，忌用鐵桶，以防生銹。
Edible printing ink
Edible printing ink developed by Wuhan Keyihua science and technology Co., Ltd has been issued with the patent certificate by State Intellectual Property Office. It offers a safer and healthier way for the drug printing package, and plays an important role in improving pharmaceutical anti-counterfeit, appearance and brand advertising. It is widely used in capsule, tablet, candy and food printing. With harmless and environmental friendly features, this solvent-based ink for the gravure printing has earned high reputation from our clients.
I, Application features
1、 Main applications: For the printing on the surface of medical and food, such as capsule, tablet, chocolate and cookies.
2、 Environmental protection: using the alcohol as diluents, it’s economic and environmental friendly.
3、 Safe: use the adjuvant with pharmaceutical grade, meeting the food and medical packaging requirement.
4、 Strong mechanical adaptability: It has good transfer printing performance and stability, good scraper applicability and ink fineness, not injure scraper and plate.
5、 Good printing effect: High degree of adhesion, good fixing performance, no color penetration, no burrs, smooth coatings and bright colors;
II, Main ingredients
This product is liquid mixture consisting of shellac, ethanol, titanium dioxide (or iron oxide or lemon yellow precipitate or blue lake precipitate ), and other kinds of pharmaceutical excipients, The total solid content is 49.0 ~ 60.0%.
III, Technical index
Item | Index |
Character | Viscous liquid, color uniformity, no agglomerate, mildew, no visible foreign material. |
Taste , smell | With the smell of ethanol, no peculiar smell. |
Identification | After the evaporation of water and ethanol, it forms toughness thin film. |
PH | 7-9 |
Color | Similar to standard sample. |
Particle size（μm） | ≤40 |
Viscosity（pa.s） | 20~80 |
Initial dryness（MM/30 seconds） | 20～50 |
Gloss（Reflective gloss meter 25°）≥ | 40 |
Heavy metal（mg/kg） | ≤0.5 |
Arsenic salt （mg/kg） | ≤0.3 |
Microbial limit | Bacteria(≤1000cfu/g) |
Mould and yeasts(≤100cfu) | |
E.coli (no) | |
salmonella（no） | |
Solid content | 49.0～60.0% |
Packing volumes | No less than identify quantity |
Category | Adjuvant for food and drug |
Storage | Sealed, keep in the dark, cool and dry conditions. |
IV, Product colors
Main color: white, black, red, yellow, blue. Customized color is available
V, Packing specification
1kg/bottle, 20 bottle/carton
VI, Attention
1、 Shake well before use;
2、 The life time is 12 months;
3、 Place in 5~35℃ dry warehouse, with well ventilated, no mouse and flies. Do not put it in the open air or keep with chemicals, hazardous substance. Moisture protection, keep away from heat source.
4、 Storage the ink in plastic buckets. In case of rust, avoid using the steel container.
