軟纜保持力試驗機：CR-1 產(chǎn)品概述： 本裝置符合GB2099.1-2008圖20、IEC60884圖20、VDE0620，適用于對插頭導線與電器附件是否牢固進行檢驗。 本裝置用于檢驗電源插頭線的導線壓緊能力，試法為將插頭朝上，插頭線穿入橫杠，插頭線下端吊掛規(guī)定之砝碼，然后以每秒 1 次的速度上下擺動100 次，再檢測插頭是否受損及電線與插頭之間不得脫落。 電源 Power AC220V / 50Hz 負載砝碼：10N、60N各1個，20N兩個； 施力頻率：60次/分鐘。 Apparatus for testing cord retention CR-1The HT apparatus for testing cord retention is for check the effectiveness of the retention of the cable of the cord anchorage .The flexible cable is then subjected 100 times to a pull of – 50 N if the rated current is 2,5 A, – 60 N if the rated current is above 2,5 A, but not more than16 Aand the rated voltage is up to and including 250 V, – 80 N if the rated current is above 2,5 A, but not more than16 Aand the rated voltage is above 250 V, – 100 N if the rated current greater than16 A. Power Supply: 220V 50Hz or 115V 60HzNumber of Test: 1~9999Rate of Testing : 60 times/minMass: 10N*1,60N*1,20N*2Conforms to standard: IEC60884Figure 20,VDE0620