聚丙烯酰胺 --- 生物醫藥

聚丙烯酰胺在生物醫藥方面應用廣泛。聚丙烯酰胺凝膠電泳（PAGE）技術，可對中藥材進行鑒定分析；薄層聚丙烯酰胺等電聚焦技術可應用在血紅蛋白普查中；醫用聚丙烯酰胺水凝膠可作為軟組織填充劑應用在整形外科手術中；聚丙烯酰胺凝膠銀染技術可應用在在半定量RT PCR中。

Polyacrylamide has been widely used in the biopharmaceutical.

Polyacrylamide gel electrophoresis (PAGE) technique can be analyzed to identify herbs; Thin polyacrylamide isoelectric focusing technology can be used in the censuses of hemoglobin; Medical polyacrylamide hydrogel can be used as soft tissue fillers applied in plastic surgery; polyacrylamide gel silver staining technique can be used in the semi-quantitative RT PCR.

非離子聚丙烯酰胺 Nonionic Polyacrylamide 

產品特性Product Features

該產品是丙烯酰胺單體的均聚物，經造粒、干燥、粉碎而成，離子化程度低。產品外觀呈白色顆?；蚍勰┕腆w狀。絮凝性能受水pH值和鹽類波動的影響小。在酸性條件下優于陰離子型，絮凝強度比陰離子型高分子絮凝劑的強。

The product is the polymer of acryl amide monomer which formed after granulation, drying and crushing , with low degree of ionization. The product appears white solid particles or powder. Flocculation performance is affected little by the fluctuation of the water pH and salt. It is better than anionic under acid condition and flocculation strength is better than anionic polymer flocculants.

1.水體中有機物過多時，一般的處理思路是首先通過物理、化學方法將水體中大量有機物沉淀下來，然后加入氧化底改劑，或者施用EM菌、光合細菌，再植入新的藻種，加快池塘的能量流動和物質循環。隨著養殖模式和養殖品種的不斷增加或改進，“肥”、“活”、“嫩”、“爽”也有了新的內涵，不能一概而論，應視具體情況而定。

· 聚丙烯酰胺：:博源凈水

· 溶解時間：:45分

· 不溶物：:≤0.2%

· 水解度：:10-60

· 品牌:博源

· 型號:

· 產品名稱:聚丙烯酰胺（pam）

· 主要成分:丙烯酰胺

· 有效物質含量:99%

· 用途:污水處理，城市污水，工業污水，增稠劑，絮凝劑

· 外觀:白色顆粒或粉末

· PH值適用范圍:4-9

· 參考用量:千分之一-千分之三

· 包裝規格:25kg/袋

· 執行質量標準:GB17514-2008