詳細說明
Tulsion? ARSENIL 能有效的去除地下水中高含量的砷，并且它適合于波動的PH和TDS的水質。產品對砷的高選擇性使得處理后的水中砷的殘留量要比WHO中對飲用水明確規定的10PPb的限制要低許多。
TulsionARSENIL 為黑色的濕潤球形，具有良好的物理和化學性能，并且擁有一次通過的時尚。
典型特性YPICAL CHARACTERISTICS）： TulsionARSENIL
型式/Type砷去除樹脂/As removal resin
主體結構/Matrix structure 交聯聚苯乙烯共聚物/Cross linked Polystyrene copolymer
官能基/Functional group樹脂上加載的氫氧化鐵和二氧化錳/Fe2(OH)3 & MnO2 loaded resin
物理型式/Physical form黑色濕潤球狀/Black Moist Spherical beads
目數/Screen size mm US mesh16 to 50
粒徑分布/PArticle size mm(95%) 0.3 - 1.2 mm
濕度/Moisture content51±3%
反洗設置/密度Backwash settled density 670 -710 g/L
PH范圍/Suitable PH range＞6.2
允許溫度/Temperature Stability 80℃
溶解性/Solubility不溶解（避免強酸），Insoluble in All common solvents. However contact
with acidic solutions to be strictly avoided.
操作條件特性（TYPICAL OPERATING CONDITIONS）Tulsion? ARSENIL
作溫度/Operating temperature 15℃ - 40℃
樹脂床高度/Resin bed depth 800 mm
最大流速/Maximum service flow 15 - 25 BV/hr (2 -3 gpm/ft3)
逆洗流速/Backwash flow rate ( for 60-70% expansion)8-20m3/hr/m2,(2.5-5gpm/ft3)
逆洗時間/Backwash duration 15 - 30 分鐘
再生/Regenerantion不可再生N/A
注意：當進水中砷含量為0.3ppm出口殘余量小于5ppb時，砷去除能力大約為1.35g/L。
測試（TESTING）：Tulsion; ARSENIL
離子交換樹脂的抽樣和測試是按標準的測試程序，即ASTMD - 2187和IS - 7330，1998.
包裝（PACKING）：Tulsion?ARSENIL
Super Sack
1000 lit
Super Sack
35 cft
MS drums
180 lit.
MS drums
7 cft
HDPE lines Bags
25 lit.
HDPE lines Bags
1 cft
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:：
